Ultra-High Capacity SDXC/SDHC Memory Card
Designed to meet the demands of high profile professional photographers and videographers, the MICRODIA XTRA ELITE™ SDXC/SDHC UHS-II cards help you to maximize your efficiency while empowering you to pursue the ultimate perfection in visual narration. XTRA ELITE™ is especially developed for use in DSLR cameras, high-definition camcorders, and UHS-I and UHS-II supporting host devices.
Read speeds of up to 300MBps help you blaze through post-production work at maximum productivity, and enhance your competiveness. Write speeds of up to 300MBps ensure you get the most out of your advanced shooting functions.
This memory card series is ideal for current and new generations of UHS-I and UHS-II enabled DSLR cameras and video cameras.
Speed Class UHS-I and UHS-II Rated for Flawless 4K Video Capture
Sustained read/write speeds can reach up to 2000X (300MBps). The XTRA ELITE™ bus interface is also classed as UHS-II* depending on your needs. The U3 ratings enable you to capture cinematic-quality 4K, FHD and 3D videos and images at a minimum sustained write speed of 30MBps. Capacities range from a standard 16GB to an extraordinary 512GB. XTRA ELITE™ supports advanced shooting functions in DSLR cameras and high-definition camcorders: continuous burst, rapid shooting, and RAW capture. It can handle 4K, Full HD and 3D video recording.
Storage Capacities up to 512GB, Easily Store RAW, TIFF, JPEG Image Formats
Maximum available capacity across the XTRA ELITE™ form factors is 512GB. You can store RAW, TIFF and JPEG image formats with room to spare while capturing a whole shooting session without interruption from uploading your photos and videos.
Travel to the desert, into snowy mountains, under water, and through the tightest airport security without harm to your digital data. XTRA ELITE™ memory cards are shock proof, x-ray proof, waterproof, dust proof and heat proof. Storage temperatures start at -40°C and top out at +75°C. Operating temperatures range from the freezing extreme (-25°C) to just under boiling point (+75°C).
MICRODIA XTRA Elite™ comprises proprietarily-developed high-speed controller and controller firmware, the latest non-volatile memory components, and the UHS-II bus that interfaces comply with the SDA’s 4.0 standard.
MICRODIA developed its own controller firmware using its proprietary and patented EPM (Enhanced Processing Management) technology. This allows multi-chanelling between the controller and the flash memory to enhance read/write speeds, as well as average-out utilization of each memory cell to prevent memory capacity from dropping too quickly.
The NAND flash used combines with the latest COB and SMT wafer fabrication technology to enable a memory increase up to 1TB.
MICRODIA XTRA Elite™ SD flash memory cards support the UHS-I and UHS-II interface. Bus speed can reach up to 300MB/s* on some UHS-II supporting host devices.
* NB: Based on MICRODIA internal testing; performance may be lower depending on host device. Pictures shown may vary from actual product. All product specifications are subject to change without prior notice.
Microdia XTRA™ ELITE™ is backed by an international lifetime limited warranty.
Product Details & Specifications
|Capacities Available:||16GB, 32GB, 64GB, 128GB, 256GB, 512GB|
|Card Dimensions:||0.94″ x 1.25″ x 0.08″ ( or 24mm x 32mm x 2mm)|
|Operating Voltage:||2.7V – 3.6V|
|File System:||SDHC: FAT 32, SDXC: exFAT|
|Operating Temperatures:||-13ºF to 167ºF (-25ºC to 75 ºC)|
|Storage Temperatures:||-40ºF to 167ºF (-40ºC to 75ºC)|
|Speed:||U3 (minimum write speed is 30MB/s)|
|Speed Class:||C10 (minimum speed is 10MB/s)|
|Maximum R/W Speed:||2000X (or 300MB/s)|
|Controller Firmware:||EPM, Multi-channelling|
|Compatibility:||Compatible with host devices that carry the official SDHC/SDXC logo|
|Warranty:||International lifetime limited warranty|
* NB: Note that UHS-II cards are compatible with all bus interfaces, but high performance is only achievable on a UHS-II host device.