|
|
|
 |
|
|
|
MICRODIA MMCPLUS™ Cards
MMCPLUS™ Card, is a standard-sized MultiMediaCard form factor (32 x 24 x 1.40mm) that is based on the latest MultiMediaCard (MMC) system specification version 4.2. This new standard offers a 5-fold improvement in performance over the previous MMC™ standard. MMCPLUS™ features 13 data pins instead of 7, it operates at faster clock speeds and supports wider bus-widths (x1, x4, x8 bit) to enable more data intensive content. It is also backwards-compatible with previous MMC™ standard host devices and are ideal for digital imaging and other data intensive applications.
|
 |
 |
|
- New form factor of MultiMediaCard
- Offer voltage capability for mobile phones and small consumer electronics device 2.7V to 3.6V
- Flexible bus width: 13 pins to support 1 to 8 data lines (host-selectable x1, x4 and x8-bit bus)
- Waterproof, dust proof, ESD proof and extreme temperature resistant
- High data transfer rate: Up to 52MB/sec
- Supports SPI Mode (Single and multiple block read and write operations)
- Compatible with all digital cameras, digital music players, mobile phones, PDAs, and
other devices featuring MMCPLUS™ or SD™/MMC™ slots
- Full backward compatibility with previous MultiMediaCard system (1bit data bus, multi-card system)
- Correction of memory field errors
- Tested internally by MICRODIA under HD BENCH
| |
| Memory Capacities | | 128MB, 256MB, 512MB, 1.0GB, 2.0GB ,4.0GB, 8.0GB | | Highest Transfer Speeds | | Up to 52MB/sec (416Mbits/sec) | | Dimensions | | Length: 32mm
Width: 24mm
Thickness: 1.4mm | | Interface | | MMC 4.X | | Connector Pin | | 13 Pins | | Temperature Performance | | -40°C to +85°C | | Support Frequencies | | 0 to 20MHZ, 0 to 26MHz, 0 to 52MHz | | Voltage Operation | | 2.7V to 3.6V | | Vibration Performance | | 15 G peak to peak max | | MTBF (mean time between failures) | | >1,000,000 hours | | Endurance | | > 100,000 cycles (Read/Write and Erase) | | Humidity Performance | | 5% to 95%
| | Bus Widths | | x1(default),x4 and x8 bit |
|
|
|
|
|
 |
 |
|
|
|
|
|
|
